The aluminum curtain rod pole produced by Henan chalco has 6061 T6, the surface can be anodized, electrophoretic coating, fluorocarbon spraying, powder spraying, wood grain transfer printing, mechanical treatment: mechanical drawing, mechanical polishing, sandblasting. Economical and practical aluminum curtain rod pole, the gold material is light, plasticity and corrosion resistance are relatively ...
Aluminum spring telescopic rod
Aluminum spring telescopic rod depends on the thickness: 6063 series aluminum alloy profiles are commonly used, and the starting thickness should be 1.2MM. This aluminum alloy spring inner locking rod uses a solid wall thickness of 1.5MM; Bend the profile and see if it can be restored to its original state after giving it away; see the chromaticity: the color of the same aluminum alloy material sho...
Balcony telescopic aluminum drying rack pole
Balcony telescopic aluminum drying rack pole is usually equipped with two drying rods, the material is mainly aluminum tube, because the aluminum surface can be treated with various surface treatments (anodized, sandblasted, foggy silver) to make it look beautiful and have a decorative effect. Henan Chalco produces Balcony telescopic aluminum drying rack pole 6063, 6061, GB/T6892-2006 standard,the ...
half inch aluminium tent poles
Half inch aluminium tent poles have a tensile strength of more than 600mpa, a yield strength of more than 540mpa, and a hardness of more than 19. Light weight, easy to carry after folding. The biggest feature of half inch aluminium tent poles is that they will not rust. The gold tent can be customized with different specifications of aluminum alloy tents, which are light and easy to carry, and heav...
aluminum tent frame support pole
The aluminum tent frame support pole is very good in terms of weight, toughness and pressure resistance. The common ones in the market are 6061 T6, 7001 -T6, and 7075 T6 aluminum tent pole . Among them, 7001 aluminum alloy is the most used because 7001 is aluminum. The toughness and hardness of the alloy are relatively good in combination. Even under heavy pressure, it will deform but will not brea...